28.6 C
New York
Tuesday, June 25, 2024

Everything you need to know before mounting your TV

Must read

With today’s thinner and lighter big screens, wall mounting your TV makes a lot of sense. You can improve your view, save space and prevent children and pets from pulling it down. 

Best Places To Buy Affordable Mid Century Modern Furniture Three Things You Should Know About Making Your Own Laundry Detergent To Avoid Ruining Your Clothes Blinds Vs. Curtains: Which should you choose? 

Let us guide you through everything you need to know to mount your TV safely and amazingly on the wall. 

  • lady watches mounted tv 
  • John Tuesday/Unsplash 
  • Calculate the distance from the seat to the seat 
  • To find the ideal viewing distance, you will need to separate the size of your TV by 0.55. For example, if you have a 60-inch TV, you should sit 109 inches from it.   
  • Adjust according to the seating arrangement and where you want to place the TV. 
  • Begin by sitting in your preferred seat and calculating the distance from the floor. The distance from the ground to eye level is then measured. Mount the TV so that its center is at eye level.  
  • If you have more seating, you can always mount the TV 42 inches from the floor to the center of the TV. A person of average height sitting on a standard sofa would be at this height.  
  • Make sure your wall mount is tall enough and think about any furniture you plan to place under the TV. The television should be placed at least four to six inches in front of the furniture. 

 Stay away from horrible areas 

There are a few places where you basically shouldn’t mount your TV. These are some: 

 Above Chimneys:

The air above the chimney heats up and most TVs do not do well in hot climates. In addition, soot and dirt that gets into the air from a wood burning fireplace could easily clog the vents of the TV and cause it to overheat. Kim Komando concludes, “You do it.” 

In the toilet:

Most TVs will not perform well in humid and hot environments. Water vapor in the air can cause gadgets to stop working. mounted tv in living room Patrick Perkins/Unsplash Choose a solid wall Despite the fact that newer TVs are less heavy than older models, that doesn’t mean they can be hung anywhere on any wall. 

You need to use the right tools and make sure your wall can support the weight of the TV. You can find the wooden supports in the wall, which are referred to as nails, using the nail finder. If possible, you should mount the TV to the studs. 

Make a wooden washer that can be properly screwed into the studs, or use properly sized drywall anchors known as toggle bolts if you can’t mount on studs. 

 Think about strings 

In the event that you’re just about to hook up your Wi-Fi and streaming fabric, then at that point you might just have a solitary power cord to stress about. Otherwise, you may have to deal with multiple cables when connecting gaming systems, DVRs or satellite boxes. 

There are several ways to hide cables: 

Use a paintable cable cover. With these covers, you can run cables from the TV to the wall in one channel. Although it is much neater, it is not invisible. 

Install the wires in the wall. Assuming your electrical outlet is located under your television, you can place links in the wall and run them using wall power units, Famous Mechanics recommends. 

Check if your TV can use One Connect.

An almost invisible single connection simplifies your cables on some TVs like Samsung. It supplies one cable that connects the TV to the control unit. This allows you to plug each of your gadgets into the controller box without expecting to run them into the TV. 

Choose the right holder 

You will need to make sure that you have the right tv wall mounting and the inclinations of the survey. 

Fixed, tiltable and fully movable wall mounts are the three main options available to you. 

When mounting the TV at eye level and knowing exactly where to place it, fixed brackets are ideal. They are inexpensive and have a clean profile that fits snugly against the wall. 

When mounting the TV higher than eye level, hinged brackets are used. They can help reduce glare and maintain an ideal viewing angle. 

If you want your mount to be as adaptable as possible, Full-Motion Mounts are the best choice. They are ideal if you need to reduce glare when viewing, want to mount in a corner or alcove, want easy access to cables or want more viewing angles. They have varying degrees of tilt, swivel, swivel and extension. 

To help you choose the right mount, you should also be aware of your TV’s screen size, weight and mounting pattern. All of this information should be included in the manual for your TV. Digital Trends provides advice on choosing the right mount. 

Have the right tools Now that you know where to mount your TV and which mount is best for it, gather your tools and get started. 

You should make sure you have the following on hand: 

  • stud finder to help you find studs in walls. 
  • instructions for the wall mount you have chosen as well as any hardware such as screws. 
  • A carpenter’s level to ensure your bracket is hung level. 
  • The right screws for the weight of your TV and the type of wall you have. 
  • electric drill and bits to fit your wall and mounting screws 
  • pencil so you can draw where the holes should be on the wall. 
  • cable management software and all necessary cables. 
  • meter to determine the appropriate wall height and distance for mounting the TV. 

More articles


Please enter your comment!
Please enter your name here

Latest article